Amy

Mi sobrina hermosa, Amy, in her new parka.

Film: TMY
EI: 400
Dilution: 1:5
Time: 6:30
Temp: 70F
Agitation: :10/1:00

PF+ @ EI 200

My beautiful niece, Andrea was visiting from CA, so I wanted to take some photos, as she's growing up so fast, and I don't know how long it will be before I see her again. I was using Pan F+, but forgot to switch the exposure mode selector back to auto from manual when I loaded the film, so I underexposed the film by two stops. The results aren't bad, but I would have preferred to shoot at ISO speed, or use a diferent film, like TMX or Acros for EI 200. This was shot handheld with my Minolta XD-11/ 58mm f1.2.

Film: Pan F+
EI: 200
Dilution: 1:10
Time: 60:00
Temp: 70F
Agitation: Stand
scan: neg

GSD-10 and Pan F+

I was playing around last night with Pan F+ and took this picture with my Minolta XD-11/58mm f1.2. The camera I'm holding is Chadwick's Zeiss Ikon Box Tengor. These are the desperate measures of a night owl working while everyone is fast asleep. I scanned this one as a negative instead of as a positive, like I usually do, and it worked much better for me.

Film: Pan F+
EI: 50
Dilution: 1:5
Time: 6:30
Temp: 70F
Agitation: :10/1:00 (ten seconds every minute, aka Ilford)

TMY EI 1600

This is a photo of my niece, the aptly named, Bella, by my son, Leaf. Leaf was shooting TMY @ EI 1600, in roomlight, with my Minolta XD-11 w/58mm f1.2, handheld. The film developed for about an hour, or so, while I did some other work. I think this combination shows a lot of promise for low light work.


Film: TMY
EI: 1600
Dilution: 1:10
Time: 60:00-75:00
Temp: 70F
scan: Neg

Introduction

GSD-10

GSD-10 is formulated specifically for slow, designer grain films like Kodak Tmax 100, Fuji Acros 100, and Ilford Delta 100, but produces excellent results with a wide range of films. GSD-10 exploits the unique characteristics of the developing agent, glycin to permit reduced agitation, and even stand development of state of the art, thin emulsion films, without streaking, mottling, or other development defects. GSD-10 produces negatives of excellent gradation, high acutance, extremely fine grain, and true speed increases of up to a full stop with designer grain films, whether developed for low contrast scenes, or high contrast scenes (expansion or contraction development). GSD-10 produces virtually no fog, even when developing to extremely high contrast and density ranges, which makes it as ideal for alternative/UV process printers as it is for 35mm and MF shooters. If you’ve struggled to obtain the maximum image quality potential of the new generation of films, GSD-10 will be a revelation.

Using GSD-10


GSD-10 is formulated specifically for slow, designer grain films, but produces excellent results with films ranging from slow document- type and ortho films, to IR and super-fast films. GSD-10 is a true acutance developer, and as such, very responsive to agitation as a development control. Unlike most true acutance developers, GSD-10 is compatible with rotary processing, but forfeits much of the increased speed, compensation and adjacency effects that reduced agitation encourages. Use 1:5 dilution for rotary processing with minimum solution volumes. Any agitation pattern from rotary to stand is practical, and will produce excellent results with the appropriate compensation.



Development Times for 1:10 dilution

TMX EI 200- 24:00/70F/*stand

Acros EI 200- 28:00/70F/*stand

FP4+ EI 160- 24:00/70F/*stand

TMY EI 800- 22:00/70F/ #1/3:00


* Continuous agitation for first minute, then stand for remainder

# Continuous agitation for first minute, then one inversion every 3:00